Latest questions about "ansys workbench"

The tool didn't complete its 0.1 sec cycle.

I am trying to input into ansys custom stress strain curves of concrete and steel.Ansys though doesnt allow me to input negative slopes.

Is it possible to install VIZIROAD on Windows 10?

Do you know what materials in ANSYS WORKBENCH can replace link180 in classical ANSYS? The string in my structure is a steel cable.

How can I use a defined displacement as input instead of force and receive force as the output of the model?

I have simulated a leaflet which rotates about an axis. The material properties are nearly approximate a rigid body.

I created a rough surface and defined the asperity by stochastic value with Ansys Mechanical Prepost.

I am using Ansys Workbench to model/analyze my Bridge created in AutoCAD/SolidWorks using lines and splines.

How to define a cross section circular with nanometer size in ANSYS Designmodeler?

I have a problem for boundary layer. In fact, my model is complex in shape. It is a multiple body (7 solid coupled by fluid).

Is there a possibility to get the size or length of an edge in Ansys, after the simulation/in the deformed object. I have a sort of a bending beam and want to know his length after deformation.

I would like to create a nonlinear spring in ANSYS using Combin39 element in order to model soil behavior. But it does not work for me. Has anyone experienced working with this element?

You are able to implement your AutoCAD drawing/design into Ansys and run a shape optimization on your design.

Is it necessary to define damage parameter of JC for a material? I have given strength parameter values, but I couldn't get hold of damage parameters.

I have line body imported in WB and I want to assign a beam section to it. The Command snippet couldn't work because the line body is shown as undefined "with question mark" in the WB tree.

How to create a PIN in Ansys Workbench?

I'm using Ansys APDL. How can I change the material property of an object to get a new solution (while the solution is already done by using different properties)?

I have created a simple 3D crack analysis simulation in Ansys Workbench 14.0 with standard crack specimen in mode 3 and I wanted to evaluate J-integral along whole crack tip line.

What are the minimum PC hardware requirements (RAM capacity, hard disk, etc.) for "Fast Enough" Ansys Workbench CFD analysis? Thanks in advance.

I have two objects. One is a geometry (.agdb format) and the other one is a mesh (.nas format). I would like to combine them both into 1 mesh by overlapping or superposing.